• Home
• About Us
• FAQ's
• Contact

• 
• 
• 

Garage Lifts

• Two Post Lifts
• Four Post Lifts
• In-Ground Lifts
• Parking Lifts
• Phantom Park Lifts
• Mid Rise Scissor Lifts
• Motorcycle Lifts

Garage Equipment

• Compressors
• Parts Washers
• Tyre Changers
• Wheel Balancers
• Contact Us
• Links
• Special Offers

Motorcycle Lifts Motor Cycle Lift ATV All Terrain Vehicle
England Scotland Wales UK

A & E Garage Equipment operate all over the UK including England, Scotland and Wales, supplying, servicing and installing a wide range of garage equipment. With over 20 years experience of selling, servicing and maintaining motorcycle lifts and garage lifts, you can be sure A & E Gararge Equipment is the right company to choose.

Motorcycle / ATV Lifts and Garage Equipment

Our speciality is sales, servicing and installation of CL or Challenger Lifts, and servicing of most makes of garage lifts, including Bend-Pak, either directly by our trained engineers or by our network of approved agents. We have a diverse range of both two post and four post lifts, to take cars, trucks, fork lifts, mobile homes or virtually any type of vehicle. Lifting capacities range from 6,000lbs. to 40,000lbs. thus providing the perfect lift for any application. As well as fixed installations, we have a range of full rise, and mid rise scissor lifts, and a range of portable battery powered lifts.

Motorcycle lift with front wheel vice manufactured in the USA by Challenger Lifts.

Motorcycle / ATV Lifts QML01A 450 kg and QML1750A 787 kg

Challenger Lifts’ 450 kg and 787 kg capacity motorcycle / ATV lifts are perfect for anyone who owns and works on motorcycles or ATVs. Dual foot pedal air controls makes this lift safe and easy for anyone to operate. With optional wheel clamps, center jacks, extensions, etc. you make have a motorcycle / ATV lift that will accommodate any bike you have.

The picture above shows the QML01A, and the picture to the right depicts the QML1750A.

Specifications for QML01A / QML1750A Motorcycle and ATV lifts.

• Lifting Capacity - 450 kg / 787 kg.
• Maximum Raised Height - 900 mm 35 inches / 1016 mm 40 inches
• Lowered Height - 185 mm 7.5 inches / 216 mm 8.5 inches
• Platform Width - 610 mm 24 inches / 750 mm 29.5 inches
• Platform Length - 2130 mm 84 inches / 2200 mm 86.5 inches
• Platform Thickness - 2.5 mm 1/10 inch / 3.25 mm 16/125 inch
• Air Supply Required - 85 - 115 psi for both

Features and Benefits

• Precision formed platforms and scissor arms
• Integrated base for stability and smooth operation
• Dual foot pedal air controls makes it safe and easy to operate
• Rear drop panel for ease of maintenance of rear wheel
• Solid approach ramps standard

Optional Accessories for Motorcycle / ATV Lifts

The images above show some optional accessories for our motorcycle / ATV lifts. They are the crank style wheel clamp, and a deluxe wheel clamp, with the middle image portraying a 1,000lb lifting capacity centre jack.

The first image is an ATV side panel set which extends the platform width to 1,219 mm. The centre image shows the ATV utility jack which is hand operated with a lift capacity of 499 kg, while the other image is a shop dolley to move the motorcycle lift around for your convenience.

Product Safety

Product safety is important to us. We supply, and are sole UK and Ireland Agents for CL Challenger Lifts, and have been to California to inspect their operation. A & E. Garage Equipment have agreed to, and are proud to be associated with Challenger Lifts. Challenger Lifts have professional engineers and partners to develop quality and design requirements to exacting US standards. They source their products globally to US standards with routine local independent inspections so they can provide reliable and cost effective, top quality garage lifts and motorcycle lifts. Their stated goal is to meet or exceed ANSI standards for each product category.

The Directors of A & E. Garage Equipment, based upon their many years experience, are particularly impressed with added structural supports welded in strategic points, and about the general thought, quality and thickness of materials that has gone into the production of these garage lifts. The same thought and care has been taken over the construction of these motor cycle lifts which also double as ATV or All Terrain Vehicles lifts.

We sometimes receive e-mail enquiries for a particular model without contact details. We pride ourselves on giving 'Best Advice' to prospective customers. We ask pertinent questions to establish the exact needs you may have, then advise on the best model for you - it has been known for us to actually save customers money by making sure they choose the correct model, based on our years of experience. Please use the link on the left or the link at the bottom of the page to our Contact Page, and include your contact number, convenient time to call and your location.

The design, material and specifications of all motorcycle / ATV lifts shown on this web site are subject to change without notice.

A & E Garage Equipment's Area of Operation

A & E Garage Equipment operate throughout England, Scotland and Wales