• Home
• About Us
• FAQ's
• Contact

• 
• 
• 

Garage Lifts

• Two Post Lifts
• Four Post Lifts
• In-Ground Lifts
• Parking Lifts
• Phantom Park Lifts
• Mid Rise Scissor Lifts
• Motorcycle Lifts

Garage Equipment

• Compressors
• Parts Washers
• Tyre Changers
• Wheel Balancers
• Contact Us
• Links
• Special Offers

4 Four Post Garage Lifts Delivered Installed Serviced Parts
England Scotland Wales UK

A & E Garage Equipment operate all over the UK including England, Scotland and Wales, supplying, servicing and installing a wide range of garage equipment. With over 20 years experience of selling, servicing and maintaining garage lifts, you can be sure A & E Gararge Equipment is the right company to choose.

Garage Lifts and Garage Equipment

Our speciality is sales, servicing and installation of CL or Challenger Lifts, and servicing of most makes of garage lifts, including Bend-Pak, either directly by our trained engineers or by our network of approved agents. We have a diverse range of both two post and four post lifts, to take cars, trucks, fork lifts, mobile homes or virtually any type of vehicle. Lifting capacities range from 6,000lbs. to 40,000lbs. thus providing the perfect lift for any application. As well as fixed installations, we have a range of full rise, and mid rise scissor lifts, and a range of portable battery powered lifts.

Four post garage lift manufactured in the USA by Challenger Lifts to industry standards.

4 Four Post Lift Q4P 12 Lifting Capacity 5,000kg 4.92 Tons

Challenger Lifts' 5,000 kg capacity Q4P12 four post lifts are loaded with features you would expect to pay more for, like louvered approach ramps, solid piece column construction, automatic wheel stops and the highest rise in the industry.

With optional rolling jacks, bolt-on alignment kit, oil drain pan, etc., you'll be able to accommodate just about anything that comes in for service and afford room to grow without unreasonable cost.

• ALI / ETL Certified
• Lifting Capacity 11,023 Lbs. / 5000 kg.
• Rise Height 78 inches / 1981 mm
• Overall Length 20' 4.5 inches / 6210 mm
• Overall Width 10' 3.75 inches / 3321 mm
• Inside Columns 116 inches / 2946 mm
• Between Columns 196 inches / 4978mm
• Height of Columns 90.5 inches / 2299 mm
• Width of Runways 20 inches / 508 mm
• Height of Runways 7 inches / 178 mm
• Minimum Width Between Runways 40 inches
  1016 mm
• Maximum Width Between Runways 43 inches
  1092 mm
• Air Supply Required 85 - 120 psi
• Motor 2.2 kw
• Voltage Single Phase: 50 HZ - 230v
• Optional Three Phase Motor
• Ceiling Height Required 149 inches / 3785mm
• Speed of rise 70 seconds
• Minimum Bay Size 12' x 24' / 3658 x 7315mm

Concrete shall have a compression of 3500 PSI and a minimum thickness of 4 inches, with 12 feet Minimum Clearance to Obstruction in front and back of Center of Post. 6 feet Minimum Clearance to Obstruction from Centerline of Structure.

The design, material and specifications of all four post lifts shown on this web site are subject to change without notice.

Four Post Alignment Lifts & Rolling Jacks from CL Challenger Lifts

Alignment Kit

The Q4P12 Four Post Garage Lift can be supplied with a bolt on alignment kit, with multi position turnplates and integrated rear slip plates, thus turning this 4 post lift into a true alignment rack.

• Optional Bolt-On Alignment Kit Turns the Q4P12 into a True Alignment Rack
• Raises Entire Level of Runway for Level 3D 4 Wheel Drive Compatible Rack
• Provides for Multi position Turnplate pockets for Maximum Wheel Base Accommodation and Versatility
• Integrated Rear Slip Plates
• Front Powdered Coated Turnplates Standard
• Photo to Left Shows Detail View of Radius Gauge Pockets, Showing Multiple Positions Available for Different Wheelbases

Rolling Jack

The Q4P12 Four Post Garage Lift can be supplied with 6000lb capacity rolling jacks.

• 6000lb lifting capacity
• Air operated hydraulic operations
• Adjustible side members for narrow or normal application
• Rise above runway 3.38 inches / 86mm - 15.38 inches / 390mm
• Optional extra, so buy one or two Rolling Jacks to suit
• Q4P12 has a three inch tolerance for width between runways - Rolling Jacks can be adjusted to suit

As shown in the picture above with the truck on the lift, some of our customers prefer to have two rolling jacks. The width of the runways on the Q4P12 are adjustable, and these rolling jacks can be adjusted to suit.

Q4P12 4 Post Lift In-Situ with Features & Benefits

This picture shows the Q4P12 in a garage workshop bay, with a single rolling jack. The Q4P12 XFX has similar specification, but is over two feet longer and two feet wider to accommodate larger vehicles.

• With a riese height of 1981 mm, possibly the highest in the industry, this four poster provides maximum headroom for working under vehicles.
• Louvered approach ramps provide tyre traction for vehicles.
• Single push button power unit with release valve provides convenience and safety when lifting and lowering vehicles.
• Additional safety feature stops lift 12 inches from ground. To lower lift to ground requires another button to be pressed which activates an alarm to prevent operatives trapping their feet.
• Solid piece column construction provides rigidity and stability for rigorous servicing needs.
• Single point air actuated lock release allows technician to disengage all four columns simultaneously.

Locking Positions & Louvered Ramps

Q4P12series closed front 4 post lift has 14 level locking positions.

All 4 post hydraulic lifts can have louvered approach ramps for better tyre grip.

Product Safety

Product safety is important to us. We supply, and are sole UK and Ireland Agents for CL Challenger Lifts, and have been to California to inspect their operation. A & E. Garage Equipment have agreed to, and are proud to be associated with Challenger Lifts. Challenger Lifts have professional engineers and partners to develop quality and design requirements to exacting US standards. They source their products globally to US standards with routine local independent inspections so they can provide reliable and cost effective, top quality garage lifts. Their stated goal is to meet or exceed ANSI standards for each product category.

The Directors of A & E. Garage Equipment, based upon their many years experience, are particularly impressed with added structural supports welded in strategic points, and about the general thought, quality and thickness of materials that has gone into the production of these garage lifts.

We sometimes receive e-mail enquiries for a particular model without contact details. We pride ourselves on giving 'Best Advice' to prospective customers. We ask pertinent questions to establish the exact needs you may have, then advise on the best model for you - it has been known for us to actually save customers money by making sure they choose the correct model, based on our years of experience. Please use the link on the left or the link at the bottom of the page to our Contact Page, and include your contact number, convenient time to call and your location.

The design, material and specifications of all four post lifts shown on this web site are subject to change without notice.

A & E Garage Equipment's Area of Operation

A & E Garage Equipment operate throughout England, Scotland and Wales